Savaş Mermer
NOSPOT
NOSPOT

PRESERVE THE BEAUTY OF NATURAL STONE

NOSPOT
FILA NOSPOT — Stain Remover Spray
FILA NOSPOT — Stain Remover Spray

NOSPOT

Stain Remover Spray

FILA NOSPOT is a ready-to-use stain remover spray developed to remove oil and grease stains from terracotta, unglazed clinker tiles, natural stone, granite, agglomerates, tumbled marble, stone and paving stones, and concrete. Thanks to its easy-to-use spray can it is extremely practical, and it cleans dirt that standard sprays cannot reach.

After spraying, it absorbs oil deposits and dries to leave a thin layer of white powder on the surface, which is removed with a brush. It is very effective outdoors on untreated terracotta surfaces or those protected with non-film-forming products, and also delivers outstanding performance on untreated surfaces. Leaving no marks on fresh stains, NOSPOT is also ideal for unglazed clinker tiles and natural stone.

Product Character

Key Features

  • Extremely practical thanks to its easy-to-use spray can.
  • Leaves no marks on fresh stains.
  • Cleans dirt that standard sprays cannot reach.
  • Also delivers outstanding performance on untreated surfaces.
  • Very effective outdoors on untreated terracotta surfaces or those protected with non-film-forming products.

Suitable Surfaces

Areas of Use

  • Terracotta
  • Unglazed clinker tiles
  • Marble (including tumbled marble), granite and natural stone
  • Agglomerate surfaces
  • Concrete, stone and paving stones
NOSPOT areas of use

4-Step Application

Application

  1. Spray

    The product is ready to use. Holding the can at an angle of approximately 45°, spray onto the stain from a distance of 15 cm.

  2. Leave to Dry

    Leave to dry for a few minutes. The product absorbs oil deposits and dries to leave a thin layer of white powder on the floor.

  3. Brush Off the Powder

    Remove the resulting powder with a brush.

  4. Wipe

    Wipe the surface with a damp cloth. If a mark remains, repeat the process.

Safe Use

Points to Consider

To use the product safely and at maximum efficiency, please read the following points carefully before application.

  • On waxed floors, after the stain has been removed, the wax must be stripped from the entire tile concerned and the wax application renewed.
  • Keep out of the reach of children.
  • Do not release into the environment after use.
  • Storage: 0-30 °C; surface during application: 5-30 °C.