CR10

Cleaner for Epoxy Residues

FILA CR10 is a concentrated, high-viscosity liquid detergent developed for the after-installation cleaning of wall and floor coverings grouted with epoxy grout. It removes epoxy grout residues, stains and marks from wall and floor surfaces, and is also effective on heavy and hardened residues.

It is ideal for non-absorbent materials such as porcelain tiles, glazed ceramic tiles and glass mosaics. Thanks to its consistency it is suitable for use on vertical surfaces and cleans without damaging the material. Its ready-to-use formula requires no dilution and is easy to apply. With a pleasant almond scent, CR10 contains biodegradable ingredients.

Texture Request WhatsApp: CR10

Product Character

Key Features

Thanks to its consistency, removes epoxy grout stains and residues from the surface.
Also effective in removing heavy and hardened residues.
Does not damage the material.
Easy to apply; suitable for use on vertical surfaces.
Pleasant almond scent.
Contains biodegradable ingredients.

Suitable Surfaces

Areas of Use

Porcelain tiles
Glazed ceramic tiles
Glass mosaics
Polished unglazed clinker tiles
Wall and floor coverings with epoxy grout

4-Step Application

Application

Prepare the Product

CR10 is ready to use and requires no dilution; shake before use. Wait until the applied grout is ready for use.
Apply to the Residues

Apply the product undiluted with a flat paintbrush; cover all residues thoroughly and wait approximately 30 minutes.
Scrub

Scrub large residues with an abrasive sponge or a spatula. On floors, a single-disc floor machine fitted with a suitable disc can be used.
Rinse

Rinse the surface thoroughly. For stubborn residues, repeat the application and allow the product to act for longer. Clean tools with water after use.

Safe Use

Points to Consider

To use the product safely and at maximum efficiency, please read the following points carefully before application.

Always test the product first on a small area of the surface to check the resistance of the material and to determine the contact time that gives the best result.
Do not use on absorbent materials, wood or methacrylate surfaces.
Check the resistance of metal surfaces to the product before application.
Keep out of the reach of children.
Do not release into the environment after use.
Storage: 5-30 °C; surface during application: 5-30 °C.